Data from Version CAST-17d
Data are available in reports that include the 2009 Progress, 2019 Progress, and the Phase III WIP scenarios.
Update released on May 28, 2020
- This release is of CAST-19, the new version of CAST. Updates change the loads in all scenarios in all years. This includes your own scenarios, scenarios shared with you, and public scenarios. Public scenarios and the shared scenarios owned by CBP Admin are recalculated for you. You need to transition run your own scenarios from CAST-17d to CAST-19 using the button on the Scenarios page. Once you move your scenarios, run the scenario to see the new loads. Just click on the green run arrow next to the scenarios. Scenarios can run simultaneously.
- The official Phase III WIPs are those that are in the CAST-17d version. The loads change in all scenarios, including the WIPs, in this new version. The BMPs from the Phase III WIPs are available in the scenario "WIP 3 CAST-19 Version". The 2025 Phase III Planning Targets do not change. The milestone goals do change. The 2009 progress changes since the entire history of BMP implementation is re-run with each new version of CAST. With the 2009 starting point adjustment, the trajectory to the 2025 planning target endpoint shifts. As we get closer to 2025, the effect of the shift is less than earlier years since we are closer to the anchored 2025 target. The 70% milestone goal will step up with each cycle (80% in 2021, 90% in 2023). Use the CAST Planning Target tool to compare planning targets to public scenarios.
- The detailed changes between CAST versions is documented on the About menu under Model Documentation. That page includes graphs showing the changes in loads and between the acres and animals in the Agricultural Censuses.
- The changes that impact loads include:
- 2017 Agricultural Census data incorporated into the land use, crop yields, and animal numbers. This includes using an updated method for integrating the land cover data with the Agricultural Census data.
- 2013 – 2015 land use acres, septic systems, sewer service areas, MS4 areas (Virginia only)
- Agricultural and urban fertilizer sales data
- Wastewater year for all jurisdictions except Virginia and the District of Columbia
- Stream bed and bank loads are now credited by agency
- Nitrogen fixation rate for “other haylage; grass silage and green chop” was updated
- Nitrogen fixation inputs for over-winter crops was updated
- Ag Census projections are for 2018 and beyond. Previously the Ag Census projected years were 2013 and beyond. The mapped land use continues to project from 2014 and beyond
- BMPs submitted, including in the TMDL critical period, are updated
- BMP costs are updated from 2010 dollars to 2018 dollars
- Biofilter BMP is fully credited, correcting an error
- BMPs that were approved for planning will become available for annual reporting:
- Agricultural Stormwater Management
- Conservation Landscaping Practices
- Septic Effluent - Advanced
- Septic Secondary Treatment - Advanced
- Septic Denitrification - Advanced
Update released on April 15, 2020
- New feature available for comparing the Chesapeake Bay TMDL Planning Targets to the official shared scenario loads. Use this feature by going to Results, Planning Targets
- The list of scenarios in selections for results, compare, and graphs is now alphabetized and a search bar has been added.
- Application version is 6.3.0. Model version remains CAST-2017d.
Update released on February 27, 2020
- Fixed bugs in the user interface including:
- Copy Existing Scenario Without BMPs now copies the wastewater dataset
- Edit cost profile Lifespan year column now excludes values less than one
- Other minor bugs in the interface were also fixed.
- Application version is 6.2.0. Model version remains CAST-2017d.
Update released on January 23, 2020
- Updates to 2019 land use data will change the loads in any scenario using the 2019 base year.
- Two cost formulas are now available when editing a cost profile – Total Implementation Cost or Total Annualized Cost. Total Implementation is new and represents the total first year cost without considering life cycle costs.
- The Edit Lifespan button is now available when editing a cost profile. This button allows users to change the lifespan years for all BMPs at once. This can be useful for considering costs for a budget cycle.
- Changes are made to the BMP pages in Edit Scenario to bring the focus of the page to BMP data entry and editing. A new “Copy BMP record and selections” action button allows users to duplicate BMP records and retain BMP information to speed up the BMP data entry process.
- New content is added to the Track TMDL Progress page, which is accessible from the CAST home page. Added content includes Phase 3 WIP BMP information, trends over time, and tributary reports.
- The “How To” section of the top navigation bar is renamed to “Learning” to better fit the collection of pages available in the drop-down list: User Documentation / Training Videos / FAQs.
- All webinar and tutorial videos are housed on one page called Training Videos under the Learning section of the top navigation bar. Videos are consolidated by topic.
- A new Frequently Asked Questions (FAQs) page is housed under the Learning section of the top navigation bar and includes all CAST FAQs organized by topic.
- Other minor bugs were also fixed.
- Application version is 6.1.0. Model version remains CAST-2017d.
Update released on October 17, 2019
- Three new aggregations are available for the Loads Report and Loads Per Unit Report that summarize results by sector totals (i.e., Agriculture, Developed, Natural, Septic, Wastewater) with varying agency options: Sector - All Agencies, Sector - Fed vs. NonFed, and Sector - Agency.
- Improvements were made to the Source Data Excel file including a new field, "BMPInputFile", added to the BMP Definitions tab to identify the BMP input file (i.e., Land, Animal, Manure Treatment) per BMP type to help users with BMP data upload into CAST and changing the field name for "BMPType" to "ReductionType" to clarify the purpose of the data presented in this field.
- The BMP page named "Manure Transport" in Edit Scenario was changed to "Manure Treatment" to more accurately represent the BMPs available in this group.
- Fixed crediting of mortality composters BMP to be based on only dead animals.
- Updated text in the ReadMe tab of the BMP Submitted Vs. Credited report.
- Added an unsubscribe button to the monthly CAST newsletter for users to opt out of the newsletter themselves rather than send an email to the CAST Team requesting to be removed from the mailing list.
- Edited procedure when CAST users need to update their email address. Now when users update their email address, their user name is updated to match the new email address.
- Other minor bugs were also fixed.
- Application version is 6.0.0. Model version remains CAST-2017d.
Update released on August 1, 2019
- Updates to non-urban and urban shoreline management nitrogen and phosphorus reduction factors for MD, DE, DC, and VA will change the loads for any scenario including the shoreline management BMP. Please note that official CBP Progress scenarios will not be re-run. CBP Progress loads will change if you copy official CBP Progress BMPs into your own scenario and re-run. Original and revised reduction factors are provided below:
- Non-Urban Shoreline Management and Urban Shoreline Management TN and TP Reduction Factors:
- DE - TN lbs/ft: Original = 0.04756/ Revised = 0.08632; TP lbs/ft: Original = 0.03362/ Revised = 0.06102
- DC - TN lbs/ft: Original = 0.04756/ Revised = 0.08632; TP lbs/ft: Original = 0.03362/ Revised = 0.06102
- MD - TN lbs/ft: Original = 0.04756/ Revised = 0.08632; TP lbs/ft: Original = 0.03362/ Revised = 0.06102
- VA - TN lbs/ft: Original = 0.01218/ Revised = 0.03614; TP lbs/ft: Original = 0.00861/ Revised = 0.02555
- Non-Urban Shoreline Management and Urban Shoreline Management TN and TP Reduction Factors:
- Application version remains 5.9.1. Model version remains CAST-2017d.
Update released on July 25, 2019
- Information on BMP cost effectiveness is now available on the Costs page accessed through the CAST home page.
- Application version is 5.9.1. Model version remains CAST-2017d.
Update released on July 16, 2019
- Updates to delivery factors for all land river segments in Land to Water and Stream to River, which are outside of the Chesapeake Bay Watershed (CBWS), will change the edge of stream (EOS) loads for segments outside of the CBWS. Edge of tide (EOT) loads for these areas remain zero.
- Nutrient management operation and maintenance costs in Default Cost Profiles were revised.
- Oyster Reef Restoration, including nutrient assimilation and enhanced denitrification secondary BMPs, are now available as new Planning BMPs for the Natural sector.
- Improvements to the CAST home page including a new log in box and changes in information presented in the Resources section of the home page.
- Fixed bugs related to an extra row error when uploading a BMP text file edited in Excel and error when editing Animal BMP % amount.
- BayTAS and the TMDL Tracker were retired and users are now redirected to CAST.
- Application version is 5.9.0. Model version remains CAST-2017d.
Update released on May 7, 2019
- Updated the units in the submitted vs. credited report to use more complete names.
- Minor bug fixes related to BMP validation.
- Application version remains 5.8.0. Model version remains CAST-2017d.
Update released on May 3, 2019
- Maryland Policy added to Land Policy BMPs.
- Application version remains 5.8.0. Model version remains CAST-2017d.
Update released on April 4, 2019
- Updates to 2018 land use and wastewater data will change the loads in any scenario using these 2018 base year and wastewater conditions.
- The 2018 Progress scenario is now available. This is the most recent current condition. It includes all BMPs functioning in 2018, including those newly implemented in 2018.
- There are six new land policy BMPs. The design of the components of each state's land policies was directed by the state. These BMPs have no effect on other states' land use, septic systems or animal numbers.
- The broiler freezer BMP and costs are now available for planning purposes.
- The bug on the animal BMP file upload has been fixed. The last line was being deleted.
- Editing user profile is improved
- Application version is 5.8.0. Model version remains CAST-2017d.
Update released on March 11, 2019
- The Manure Treatment Technologies BMP was updated to allow manure to be moved within the same county for treatment. Manure Transport still requires transport to be from and to different counties
- Users who had blocked the icon viewer used by CAST will now be able to view the icons from a different source. This does not affect any loads or functionality.
- Application version is 5.7.1 and model version remains CAST-2017d.
Update released on February 19, 2019
- Updates to wastewater data in Virginia will change the loads in your scenario. The combined sanitary sewer disconnections are being updated in Virginia so the load goes to either non-regulated or MS4 land. Previously the disconnected load was distributed only to MS4 land. This will change the balance of load in the non-regulated and MS4 land. The stream bed and bank load also will change. The stream bed and bank load source is determined using a ratio of the total edge-of-stream load impacted. This change impacts all years since disconnections have been happening over time, not just in the present year.
- Application version remains 5.7.0. Model version remains CAST-2017d.
Update released on February 14, 2019
- The extra row appended to the BMP Input File report is now removed. Uploading one of these files to a scenario will no longer result in an error message.
- User documentation is available for the Public Cost Profile page, which is accessible from the home page before logging in.
- The Add BMP window on the edit scenario pages has improvements that make editing perform more smoothly.
- Separation of Combined Sewer Overflows (CSO) has been updated in DC so that it only occurs on non-federal lands. This will change the loads in DC scenarios for federal and non-federal lands. In Virginia, there was approval to make changes so that separation of CSOs can result in land moving from combined sanitary stormwater (CSS) to either non-regulated or MS4, not solely MS4. However, users will not see a change because no new data was provided to indicate how much of the CSS land goes to non-federal.
- Application version is 5.7.0. Model version remains CAST-2017d.
Update released on February 12, 2019
- Costs were updated for select BMPs. Some of these BMPs did not have costs assigned. Others had costs reevaluated. This change affects the costs in the public reports and scenarios that use the state or watershed default cost profile.
- Septic-includes new cost estimates for all eight septic technologies, not just the three "advanced" ones
- Saturated buffers
- Denitrification ditch reactors
- Conservation landscaping
- Oyster aquaculture (reevaluated)
- Manure gasification (reevaluated, remains unchanged)
- Should you find the costs do not reflect the practice as you design it or your local area's costs, please change the default to an amount that is accurate for your design and area.
- Application version is 5.6.0. Model version remains CAST-2017d.
Update released on February 4, 2019
- When adding or editing scenarios, the BMP files uploaded or copied are now listed. This is to help users see the history of BMPs updated using this functionality.
- The BMP Summary Report now shows the Land Policy BMP acres and percent implementation for every geographic scale selected.
- BMP files may now be uploaded with different number formats without producing an error.
- The invalid BMP grid allows a data row to be deleted if desired.
- The source data report includes the full name of the BMP load source group.
- Other minor bug fixes were also fixed.
- Application version is 5.6.0. Model version remains CAST-2017d.
Update released on November 19, 2018
- Bug fixes including:
- The CAST Development Team engineered a new way to run scenarios, validation, and reports that make the user interface much more responsive. Scenarios and other functionality will no longer time out.
- When editing a scenario, BMPs edited in the table are now fully validated.
- Author is now alphabetized on the shared scenarios filter of the Scenarios page.
- Summary BMP report now includes an indicator of annual or cumulative practices and the more specific BMP unit.
- Base condition report now includes a tab for stream and shoreline feet.
- Source sector is now in the Source data table tabs for BMP load source group and BMP units.
- Virginia-specific geographies are added to the Source data table geographic references tab.
- Application version is 5.5. Model version remains CAST-2017d.
Update released on September 27, 2018
- Fixed a bug in the user interface for Add BMPs. The Agency drop-down list was not populating. The issue is now fixed and Agency populates as intended.
- Application version is 5.4.1. Model version remains CAST-2017d.
Update released on August 30, 2018
- Add Scenario and Scenario Metadata screen was reorganized to provide additional space for viewing geography names.
- Loading rate (lbs/acre) is now available on the Compare Scenarios page and as a downloadable report.
- The sector graphs now include more divisions so you can see the different loads by regulated and non-regulated load sources.
- Wastewater delivery factors are included in the source data table.
- Adding Land Policy BMPs is made easier by allowing multiple selections.
- Rounding in reports are updated to show the correct number of decimal places.
- Application version is 5.4. Model version remains CAST-2017d.
Update released on August 21, 2018
- New BMPs are available for scenarios with planning BMPs. The BMPs include:
- Denitrifying Ditch Bioreactors: Diversion of tile-line flow through a carbon-source filter to enhance conversion of nitrate to nitrogen gas that volatilizes.
- Saturated Buffers: Diversion of tile-line flow to a subsurface, perforated distribution pipe used to divert and spread drainage system discharge to a vegetated area to increase soil saturation.
- Conservation Landscaping Practices: The conversion of managed turf into actively maintained perennial meadows, using species that are native to the Chesapeake Bay region.
- Septic Denitrification - Advanced: The septic system should employ both a 50% denitrification unit for pre-treatment of waste and an enhanced in situ treatment system within the soil treatment unit. This BMP should be used only for systems that employ integrated fixed-film activated sludge (IFAS) pre-treatment technologies with advanced drip dispersal units for in situ treatment within the soil treatment unit.
- Septic Effluent - Advanced: The septic system should employ an enhanced in situ treatment system within the soil treatment unit with no secondary treatment or enhanced denitrification technology. This system must employ shallow-placed, pressure-dosed dispersal units or elevated sand mounds with pressure-dosed dispersal for in situ treatment within the soil treatment unit designed to reduce 50% TN.
- Septic Secondary Treatment - Advanced: Processes occurring within the soil treatment unit, including drip dispersal systems designed to produce a gross 60% TN reduction.
- Application version remains 5.3.1. Model version remains CAST-2017d.
Update released on July 31, 2018
- Report generation will be faster with this update.
- Application version is 5.3.1. Model version remains CAST-2017d.
Update released on July 24, 2018
- Updates to wastewater data in Maryland will change the loads in your scenario. You will need to rerun any scenarios that use the 2017 wastewater for Maryland. No other states or years are impacted. In addition to wastewater loads, the stream bed and bank load also will change. The stream bed and bank load source is determined using a ratio of the total edge-of-stream load from all other load sources except stream bed and bank.
- Application version remains 5.3.0. Model version remains CAST-2017d.
Update released on July 10, 2018
- Updates change the loads in all scenarios in all years. This includes your own scenarios, scenarios shared with you, and public scenarios including the 2010 E3 and No Action. The update to the 2010 E3 and No action result in a change to the planning targets for the Phase III Watershed Implementation Plans. Public scenarios and the shared scenarios owned by CBP Admin are recalculated for you. You need to run your own scenarios to see the new loads. Just click on the green run arrow next to the scenarios. Scenarios can run simultaneously. The changes that impact loads include:
- Legume fixation was overestimated. Now less TN is fixed by legumes.
- The baseline BMPs are updated. This impacts the amount of backed out BMPs, which can be seen in the Credited versus Submitted BMP report. The 2012 amount is used to determine if more or less is implemented in years from 2012 forward. The immediately prior year is used for years prior to 2012. A change to the manure transported impacts the amount of plant-available phosphorus available.
- The baseline loads are updated. This change also required an update to the delivery factors to the edge-of-stream and edge-of-tide, and the sensitivity of input to runoff.
- The historic crop need met with manure, fertilizer and biosolids is updated. The crop need is calculated based on nutrients available, location of nutrients after BMPs, and uptake. Crop need is established for 2012 and then used to determine future years fertilizer application. The immediately prior year is used for years prior to 2012.
- The Everything by Everyone Everywhere (E3) scenario has changed.
- New stream restoration implementation levels
- New BMP implementation for federal facilities and adjustment to the implementation on non-federal that accounts for some implementation moving to federal
- Changes to location of BMPs in the Chesapeake Bay Watershed. Previously BMPs were applied to the entire county including the area outside the Watershed
- Removal of buffers on agricultural drainage ditches in Delaware and Maryland
- Stream loads may now be negative. This is consistent with all other scenarios where this can happen depending on the amount of stream restoration BMP. In this E3, stream loads are negative for TN in the District of Columbia for the National Park Service and in Maryland for the Department of Defense. Many more instances occur for TP and Sediment. The overall load is positive since the land load offsets this negative stream load.
- Correction to one wastewater treatment facility in Virginia for the 2017 year
- Virginia has new construction land use acres for 2025. This affects the other land use acres and the land policy BMP data
- The 2025 Phase II WIP scenario base condition changed from Historic Trends to Current Zoning to be consistent with the recommendation for building the Phase III WIP on the Current Zoning base condition.
- Application version is 5.3.0. Model version is now CAST-2017d.
Update released on June 12, 2018
- Updates change the loads in your scenarios, scenarios shared with you, and public scenarios for any scenario on years 2014 to 2025. The 2010 No Action and E3 are not changing since they are on 2010. Public scenarios and the shared scenarios owned by CBP Admin are recalculated for you. For your scenarios on a year between 2014 and 2025, you need to run your own scenarios to see the new loads. Just click on the green run arrow next to the scenarios. Scenarios can run simultaneously. The changes that impact loads include:
- Septic system for 2014 to 2025
- Harvested forest acres in Virginia for years 2014 to 2016
- Construction acres in Virginia for 2015
- Harvested forest and Construction acres in West Virginia for 2014 to 2016
- Harvested forest in the District of Columbia has been removed for 2014 to 2025
- Septic systems in the District of Columbia are held constant from 2013 to 2025
- The create a login and forgot password functionality has been redesigned so it is simpler.
- Compare maps has new functionality and now includes the annual progress scenarios, Phase 2 WIP, E3 and No Action scenarios.
- Summary BMPs report has two new worksheets that explain how BMPs are grouped and how the percent implementation is calculated.
- Added new Virginia geography types of Soil and Water Conservation Districts, Soil and Water Conservation District Areas, and Planning District Commissions.
- The BMP submitted vs. credited report has a change to the way that Amount Backed Out is reported. The column now shows only the amount backed out rather than the 2012 credited amount, which is used to calculate the amount backed out for years post-2012.
- Application version is 5.2.0. Model version is now CAST-2017c.
Update released on May 14, 2018
- There error with the loads report where aggregations were not correct was corrected.
- The sample BMP files for upload included extraneous text in the headers and this was removed.
- The link to the BayFAST button on the home page was removed since it is the prior version of the model and is inconsistent with the current CAST version.
- Compare Maps has new functionality and now includes all public scenarios. This includes all the final progress scenarios, Phase II WIP, E3, and No Action.
- Application version is 5.1.2. Model version remains unchanged and is CAST-2017b.
Update released on April 3, 2018
- System performance was tuned. CAST now runs faster. There is no impact to any calculations or data.
- Application version is 5.1.1. Model version remains unchanged and is CAST-2017b.
Update released on March 28, 2018
Update released on March 16, 2018
- Bug fixed with sharing scenarios. Scenarios are now shared only with the users selected from the list.
- Application version is 5.0.2. Model version remains unchanged and is CAST-2017.
Update released on March 13, 2018
- The Maryland Forest Conservation Act BMP is no longer available. This BMP is superseded by the high resolution land use that includes protected lands and forecasts that account for the impact of current policies. The BMP remains in previous scenarios. When editing a scenario, the Maryland Forest Conservation Act BMP will be invalid.
- Application version remains unchanged and is 5.0.1. Model version remains unchanged and is CAST-2017.
Update released on March 7, 2018
- Data in reports is now formatted as number, not text.
- Special characters are now allowed in scenario and report names.
- Load report is no longer duplicating wastewater data where more than one scenario is selected.
- Application version is 5.0.1. Model version remains unchanged and is CAST-2017.
Update released on February 27, 2018
- CAST reporting has been enhanced. Backend processing technology has been improved.
- Model version is included in all downloaded files.
- Report column headers were made consistent across report types.
- Application version is 5.0. Model version remains unchanged and is CAST-2017.
Update released on January 25, 2018
- Corrected the animal numbers and animal units displayed on the Edit Scenario, Animal BMP page. It now shows only the number of animals in the geography of the scenario.
- Repaired problems with sharing scenarios with groups.
- Repaired issues with uploading large land BMP files to scenarios.
- Mouse-over description of Base Condition added.
- BMP grids fixed so they will no longer freeze when there are a lot of BMPs. This includes changing the count of records shown at one time and adding ability to delete to 500 records. The total record count that remains to be deleted is shown.
- Other minor bug fixes to the CAST interface.
- Application version is 4.11. Model version remains unchanged and is CAST-2017.
Update released on January 11, 2018
- On the scenario page, selection of the base condition year and base condition projection method are two separate choices. This reduces the items in each drop down list to make the selections more clear. Historic Trend base condition remains available. The Current Zoning base condition will become available in the coming weeks. Other base conditions may become available in the future.
- The loads report is newly formatted to facilitate analysis. It now only has one header row.
- All reports have additional information included to more clearly identify the geography.
- Reports types are sorted alphabetically.
- Results are returned faster on the Compare Scenarios screen.
- The 2014, 2015, 2016 and 2017 Progress scenarios are being finalized. Different versions are released on a regular basis. Once the final version is approved inteh spring, earlier versions no longer will be available in the shared scenarios list.
- Application version is 4.10. Model version remains unchanged and is CAST-2017.
Update released on December 21, 2017
- The model version is now final. The Draft Final 12/7/2017 version of the model was approved by the Chesapeake Bay Program Partnership's Principals' Staff Committee and is now named CAST-2017.
- The next updates to the model methodology and assumptions are scheduled for 2019. The user interface may continue to be upgraded. New data, such as base conditions, may continue to be added.
Update released on December 12, 2017
- Local area planning targets link added to home page. The targets will be added when the final version of the draft targets are available.
- Functionality for sending email to all CAST users is added.
- Tuned several functions to make them faster.
- Minor bugs on the user interface were fixed.
- Bug with sharing scenarios that removed results is corrected.
- CAST user documentation updated.
- Corrected the unit on the Compare loads tab to pound per year.
- Removed septic from the Compare acres grid since septics are a direct load to the stream and do not have acres.
- Added data version and application version to the Source data download table.
- In reports grid, the name of the report pops up when you hover over it. This allows users to see the full name where the names are long and have no spaces.
Update released on December 7, 2017
Update released on November 28, 2017
- Updates change the loads in your scenarios, scenarios shared with you, and public scenarios. The shoreline load used for the E3 scenario was changed to have the shoreline BMP added to an additional 10% of the unimproved shoreline. The shoreline load for the no action, or no BMP, scenario is now equivalent to 2008. All other scenarios use the load from 2008 with shoreline BMPs reported after 2008. This decision was made at the Chesapeake Bay Program Partnership's 11/27/2017 Water Quality Goal Implementation Team meeting. All scenario loads are recalculated for you.
- Model version is updated to Draft Final 11/27/2017. Application version remains unchanged and is 4.8
Update released November 9, 2017
- Updates change the loads in your scenarios, scenarios shared with you, and public scenarios. Public scenarios and the shared scenarios owned by CBP Admin are recalculated for users. Users need to run their scenarios to see the new loads. Just click on the green run arrow next to all of your scenarios. Scenarios can run simultaneously. The changes that impact loads include:
- Model version updated to the Draft Final October 2017 version. This is consistent with the latest Phase 6 calibration that is being presented to the Principal Staff Committee in December.
- New load source amounts for years 2014 to 2025
- New septic system data
- Agricultural Irrigation Water Capture Reuse BMP-changed the reduction efficiency, per the direction of the Agricultural Workgroup
- Agricultural Stormwater BMP was added, per the direction of the Agricultural Workgroup
- Improved error handling so users now receive an email
- Sped up the select list for the geography selection
- Cost profiles are now available on the public (non-logged in) page
- Maps are now available to logged in users under results
- Federal facility information is added to the home page under progress reporting
- Application version 4.8
Update released October 16, 2017
- Added the ability to copy scenario metadata from an existing scenario when creating a new scenario
- Improved speed of adding BMPs
- Added detailed source data files for download
- Application version 4.7
Update released October 6, 2017
- Added Nutrients Applied report.
- Fixed ability to select geographic areas when using Microsoft Edge and IE browsers.
- Application version 4.6.1
Update released October 1, 2017
- Model version updated to the Draft Final September 25, 2017 version. This is consistent with the data presented at the September 2017 Water Quality Goal Implementation Team face-to-face meeting. Scenarios results will be different than before because of this change.
- Data version change from "Draft Final 7/14/2017" to "Draft Final 9/25/2017".
- The buffer BMPs were organized in groups so that there are primary BMPs of streamside and upland buffers.
- Application version 4.6.0
Update released September 18, 2017
- Nutrients applied was removed from the Base Conditions report. It will be added to a new report in the next release, planned for 10/2/2017.
- The buffer BMPs with exclusion fencing were updated to include units of length and width, in addition to area.
- Improved speed of updating BMPs in the table on the add BMP pages.
- Improved functionality of geographic selection box so it is faster and more reliable.
- Added BMP type as official or planning to source data spreadsheet.
- Page layout inconsistencies were corrected.
- Application version 4.5.0
Update released August 15, 2017
- Fixed bug where scenarios were not populating in a list for reports at the modeling segment scale.
- Application version 4.3.1
Update released August 11, 2017
- Minor bug fixes with the user interface were corrected. These included selecting units with some BMPs, correcting the BMP summary downloaded report, and enabling the cancel button on the contact us email.
- The documentation may now be downloaded.
- The amount has been added to the result pie charts in addition to percent.
- A filter for reports to show my scenarios, shared scenario and public scenarios is added.
- Registering as a new user and entering a password has been improved to eliminate copy/paste issues with the temporary password.
- Application version 4.3.0
Update released July 26, 2017
- Minor bug fixes with the user interface were corrected. These included selecting units with some BMPs, correcting the downloaded report for BMP files, and validating manure transport files that are uploaded to a new scenario.
- Application version 4.2.1
Update released July 21, 2017
- Added a new report type that allows BMPs to be downloaded in a format that can be uploaded to a scenario
- Added a home page notification banner to replace the need for sending users emails
- Adjusted the number of characters available for cost profile description, scenario description and notes
- Updated help for the new public reports maps page
- Corrected the spelling on the email sent for reset password confirmation
- Added filter for BMPs on the cost profiles grid
- Removed abbreviations from the nutrients applied report
- Sorted animal types in animal and manure BMP grids the same
- Application version 4.2.0
Update released July 14, 2017
- Updates change the loads in your scenarios, scenarios shared with you, and public scenarios. Public scenarios and the shared scenarios owned by CBP Admin will be recalculated for users. Users will need to run your scenarios to see the new loads. Just click on the green run arrow next to all of your scenarios. Scenarios can run simultaneously. The changes that impact loads include:
- Soil phosphorus — change how it is calculated in scenarios so it follows the logic used in the calibration
- Biosolids — correct the method used to split into nutrient species
- Cover management factor (C-Factor) — change method used in scenarios so the phosphorus and sediment loads vary with inputs.
- Septic — include the updated population on septic.
- Data version change from "Draft Final" to "Draft Final 7/14/2017".
- Application version 4.1.1
Update released July 11, 2017
- Corrections were made to the public reports. The BMP submitted vs. Credited report was not including data in all three BMP sheets (land, animal, manure). The Loads report now returns the aggregation type selected by the user.
- A system error was generated when deleting an edited scenario. This is now corrected so delete works properly.
- Application version 4.1.1
Update released July 3, 2017
- Public loads report is returning only BMP Summary report. Other report types made unavailable until corrections are made to the procedure to produce the report.
- Tool tips are added for Aggregations on the Reports page.
- Maps are added under Public Reports.
- Interface updated so that the Geographic Scale selection under reports does not freeze.
- Miscellaneous minor bugs on the interface were fixed.
- Application version 4.1.0
Update released June 22, 2017
- Registration email rewritten to be clearer.
- Unit corrected on downloaded Compare Scenarios table.
- Pie charts under graphs are now returning wastewater data.
- BMPs with multiple measures, like Manure Treatment Technologies, are now copying all measures. Previously only one measure was copied.
- Miscellaneous minor bugs on the interface were fixed.
- Application version 4.0.1
Update released June 15, 2017
This is the Draft Final version of Phase 6 CAST. Shared scenarios include:
- Phase 2 Watershed Implementation Plan (WIP) BMPs translated to the Phase 6 BMPs, load sources, and model segmentation
- Annual implementation scenarios for 1985 through 2013
- Draft Everything, Everywhere by Everyone (E3). It is draft because it has not been reviewed by the Chesapeake Bay Program Partnership and there is no manure transport BMP in the scenario.
- No Action, that is, no BMPs.
- Application version 4.0.0
Update released April 3, 2017
This is the beta version of Phase 6 CAST made available for reviewing CAST functionality. Data are hypothetical and scenarios are temporary. Once the Chesapeake Bay Program Partnership releases the Draft Final version scenario data, CAST will be available for data review at CAST.ChesapeakeBay.net. At that time, new logins will need to be created and scenarios will be saved. CAST will be the model used for management purposes for the Chesapeake Bay Program Partnership. CAST 2017 and the Scenario Builder + Watershed Model are now the same model.